> How to change blind slats

How to change blind slats

Blinds are elements that allow us to decorate spaces; at the same time that they provide us with other functionalities such as protecting us from the sun’s rays or granting privacy to the interior of the home. With its different styles, materials, models and colors; they are capable of providing warmth and elegance to any environment.

However, almost all models are made up of folded layers that tend to deteriorate. over the years. That is why in this article, we will teach you how to change the broken slats of a blind. In this way you can solve the problem, saving you a good amount of money and thus avoiding unnecessary frustrations.

Previous considerations: Change the slats of a blind

The main system with which the blinds work consists of rolling up the slats to store them in a compartment known as drum; located in the upper part of the structure. This mechanism (manual or automatic), can fold or unfold the folds according to the user’s needs.

The problem arises when the slats bend, break or deteriorate; since it affects its functionality, damages its appearance and generates a strong stress on the owners. This inconvenience is one of the most common and it tends to be done quite frequently. Especially in homes with small children or in blinds that have been installed for several years.

Although it is possible to change the slats for new ones; in some cases it will be impossible. This is because, over the years, it has become difficult to find slats of the same type as those installed in our blinds; so we will have to find out if the manufacturer has left some more or if not, replace them with ones that are as similar as possible. In any case, all is not completely lost.

Step by step: How to change the slats of a blind

In general, changing the slats is a simple task; But it requires a lot of skill, patience and above all, skill. We advise you to carry out this procedure in a quiet space and with enough time, so you don’t go to the races and avoid making mistakes. Alright, let’s get started:

Step 1: To begin, remove the axle cap to expose the inner compartment of the shade. Although most drawers have a snap-on lid, some use screws. So you will have to analyze whether to use a spade or star drill, as the case may be.

Step 2: Unfold the entire blind, so that no rolled element remains on the shaft. What we are looking for is to clear the blind box.

Step 3: Now, you will have to release the blind from the axis. Some models have straps screwed to the shaft; others some plastic strips or springs that are hooked to the grooves of the shaft.

Before releasing the shade, put a pair of clothespins at the entrance of the tape collector. In this way, we will avoid that when you release the blind the tape is recovered by the tape collector and the shaft unwinds.

Step 4: Once you have released the shaft, proceed to remove the upper part of the blind. Inside the guides there should be a piece of the blind, due to the broken slats.

Step 5: Now, proceed to remove the broken slat. These are removed and put on, through a groove that they have and that allows them to slide horizontally. It may be the case that the broken slat is in the lower or upper section of the extension; wherever it is, you’ll have to remove it.

Step 6: When you have finished removing the broken slats, you will need to remove the lower piece of blind. It is not necessary that you remove it completely, it will be enough to remove two or three slats out of the box; this way you can work more comfortably.

Now, move one of the slats until it is almost out on one side; Bring the piece of upper blind that you removed earlier and put the slat back in place, making it enter between the two blinds through the groove.

Step 7: Finally, put the blind back inside the guides very carefully. Attach it to the axle, the same way it was before removing it. Remove the clothespins and proceed to check the final result; if they go up and down perfectly. Ready, you have successfully repaired the slats of your blind !.

The best materials for blinds

Although there are many models of blinds and materials with which they are manufactured, the most common are PCV and aluminum. Each of these compounds offers multiple benefits according to the needs of the users.

For example, those made of thermal aluminum are quite light and highly resistant blinds; although on the other hand, they are quite expensive. The main advantage they offer is that they contain the temperature of the rooms; so they are capable of covering the light by 100%.

Those made of PCV are much cheaper and although they fulfill their function, they can deteriorate more quickly. and they are a little heavier. On the other hand, they prevent the entry of sunlight partially; attenuating the light input by 80% and they are not able to retain the external temperature of the room.

Today, wooden models are starting to gain popularity for their attractive designs full of character. Although highly decorative, they serve a similar function to PCV blinds; partially retaining light and unable to repel heat. Despite this, they are a great option for homes that want a touch of functional design.

Regardless of the type of blind you have, they are capable of bringing multiple benefits to your home, business or office. So it is worth repairing those damaged slats, in order to have a blind that works with optimal operation again.

On the other hand, in the event that you need to acquire a new one; look at the various models and materials on the market. These can provide you with greater benefits such as insulation against noise, UV rays or sun protection.

How to Replace a Broken Routless Slat in a Horizontal Blind

How to Replace a Broken Routless Slat in a Horizontal Blind

Leave a Reply

Your email address will not be published.