> How to make a homemade master key Look how easy!

How to make a homemade master key Look how easy!

Keys are indispensable objects that we all have in our possession; Because they are the instruments that allow us to open padlocks, vehicles or open and close the locks in the different areas that are at our disposal (homes, offices or businesses).

Due to their constant use and mobility, it is common for these to end up being lost or even breaking. Therefore, it is essential that in every home, business or set of offices; a master key exists.

Master keys can become great allies, thanks to the fact that they are designed in such a way that they can open a large number of locks (everything will depend on the type). For this reason, we advise you to have one, as a precautionary measure and security. In this article, we will teach you everything you need to know so that you can successfully make your own homemade master key. To do this, you we will provide a list with the materials you’ll need, as well as the step-by-step procedure to create it. If you want to learn how, keep reading.

Pre-manufacturing considerations

Due to the fact that we will carry out a locksmith job, it is essential that we have the basic security measures. This will not only guarantee us protection, but will also facilitate the correct execution of our work. Therefore, consider:

  • Work space: To carry out any locksmith work, it is necessary to have a specially delimited area for it. In this way we will have enough peace of mind to take care of the most delicate details in the execution. We can also have greater comfort and ease of using our tools, without the intervention of third parties.
  • Organization: It is necessary that you be orderly throughout the process, in this way you will avoid a large number of domestic accidents. Additionally, once the manufacture of the master key is finished, you must return the tools to their usual places.
  • Safety equipment: During the entire procedure, use safety equipment. It is common that in locksmith work, there are metallic particles flying; so it is essential that we protect our eyes. In addition, work gloves can protect the skin from cuts generated when handling the metal foils.

Materials to make a homemade Master Key

Before starting the manufacturing process, it is essential that you gather all the materials and tools that we will indicate. Do not skip any, so that the execution is as simple as possible.

  • Original key.
  • Master key blank.
  • 3x5cm tin foil or sheet.
  • Pressure clamp or clamping pliers.
  • Scissors, cutter or any tool that allows you to cut can comfortably.
  • Metal file.
  • Fine tip permanent marker.
  • Work gloves.
  • Safety glasses.

Step by Step: How to Make a Homemade Skeleton Key

The procedure that we will teach you next is quite simple; But doing it correctly involves taking due time in every little detail. Therefore, we will need a lot of patience throughout the manufacturing process. To make a homemade passkey, follow the instructions below:

Step 1: Place the original key on the tin foil and trace the shape of it, using the fine-tipped marker. Pay a lot of attention to this process, especially your teeth; Since the silhouette you draw on the tin must be exactly the same as the original key.

Step 2: Proceed to cut out the silhouette on the tin foil, using the cutting tool of your choice. Preferably, use a special scissors to cut iron; This will be strong enough to cut through the tin smoothly.

Step 3: When you have cut the silhouette and see that it is exactly the same as the original, proceed to align it on the blank key. Hold both items using the pressure clamp or clamp; remember that they must be perfectly aligned or the end result will not work.

Step 4: Next, we will begin the process of shaping our key. To do this, place the metal file in your dominant hand; while with the other hand, you will hold the pressure clamp. The idea is that with your dominant hand, you can sand and shape each tooth with the greatest skill and care possible. Be very patient and precise at this point. If you feel fatigued, it is best to take a break and continue later.

Step 5: Check the result with the original key, every so often. Once you notice that they are very similar, remove the clamp and try the master key in the lock. If it doesn’t fit, continue filing and modeling until you achieve your goal. You may need to fix the tin model again, for a sharper guide.

Step 6: Check again if the master key works in the lock. Remember that master keys are unique, therefore, you will need tact and multiple attempts before you can open the lock.

Generally, they need various final adjustments before accomplishing the task. So you will have to do a lot of work modeling the key. Sometimes the most insignificant details can be the ones that prevent it from working, so we must have a sharp eye in this process. A good way to check our progress is by comparing both models using a magnified lens.

Final thoughts

One of the most important aspects, prior to creating the homemade master key, is the choice of materials and tools. For its part, the blank key on which the copy will be sanded must be of excellent quality or otherwise, there is a risk that it will break while it is being shaped. So it is necessary to have quality raw material. The same happens with the clamp, which must fulfill its objective; Since if the key and the tin foil move while we are filing, we could lose all our work.

Lastly, be patient. These processes are simple, but they require a good amount of time and above all, a lot of patience. Remember that you are not using a lathe, but a file; so it will take you longer to make your own keys. Don’t rush and take as many breaks as you need, so your mind doesn’t get fatigued. Once the process is complete, take pride in having made your own homemade passkey, congratulations!.

How To Copy a Key Like a Spy

How To Copy a Key Like a Spy

Leave a Reply

Your email address will not be published.