> How to open a breech plate

How to open a breech plate

The bedrooms are our sacred places, where we keep personal items. That is why the plates that we install there, are more to maintain privacyHowever, safety is also a priority and a necessity in equal parts.

Sometimes, due to some forgetfulness or an incident, we cannot access our room, and it is at that moment that we ask ourselves:how to open a breech plate?

That is why this article is dedicated, exclusively, to show you some simple methods that will allow you to open the sheet of your bedroom on your own.

Identify the sheet metal model you have in the chamber

In general, push-button or rotary button type plates are installed in bedrooms, which could be said are the most common, but it is true that it is also normal to find plates with key opening, just as popular.

This detail is important, because it will illustrate the most suitable method to apply. As you know, the operating mechanism is similar, but not exact, to that of the others, and each one has a technique that will allow opening, which is what you want, right?

Well, pay attention to every detail. Follow the steps that we indicate and you will see how the results will be successful, and you will immediately access your bedroom. It is not that difficult, you just need patience and have the necessary tools.

Methods that open chamber veneers

  • Lockpicks with household objects

For these cases the question is simple, the pick technique will be applied in the hole where the plate opens in a normal setting, with a key. That is, you can only do it if you notice that it has a crack in the center.

There is also the advantage that if, by chance, the sheet has the past lock mechanism, this method will be able to unlock it.

Use objects that are easily accessible, such as: hair clip, paperclip, wire or a nail clipper blade, which is ultra fine and not too wide. It is important to comply with the characteristics of the tools so that it can penetrate to the bottom of the sheet.

If you opt for any of the compliant materials, you just have to give it a stretched, smooth and flat shape, long enough, for what has already been explained. This is how the pick will be, but you will also need a tension wrench.

To do it, you carry out the same process as aboveYou will only curve one end as if it were a letter L. It is to exert pressure and stop unnecessary penetration.

It is this tool that you will insert first, through the central slot. Once you do, take care of leaving it lodged right at the top of the sheet. What will happen there is that the internal parts will not move and will maintain a necessary tension.

Then, you insert the pick, which you previously made, under the tension key. Make it well glued to the end of the sheet, because in this way it will be easy to lift the pistons that maintain the safety lock.

In chamber sheets the pistons are few. When you have them ready, and you are at the end of the sheet, you leave it there to resume work, but with the tension wrench, which will do the job of the original wrench.

Therefore, imagine that this tool is your usual wrench, and you turn it, first to the left, to immediately turn it to the right. So until it opens. It doesn’t take long or tries.

  • Lever method with plastic

To implement the lever method with plastic, it must have a hard but flexible texture. You can use the plastic from a bottle, card, or x-ray that you no longer need.

The technique only applies if the plate does not have the safety on, that is, if it is locked for a reason that you do not know, for example. The lever method is your best option because it does not require the expertise of a professional.

To begin, the plastic in question is introduced through the line of sight that exists between the door and the frame. From top to bottom to start a slide that takes you to the plate.

When you get there, the goal will be the slip; the one that is found making a perfect fit between the sheet metal and the door frame. As you know, the piece of metal has free movement.

Then, with the plastic, you collect the slip to take it to its place of origin, the sheet metal. When you do, turn the knob and push the door with your body, the work has to be synchronized and you will see immediate results.

  • Other tools that are useful

When working on projects of this type, creativity and common sense provide ideas that add skills to execute to be successful in what is being done. This is how great things can be done with tools and objects.

Screwdriver, pliers or a hanger are some. If you are interested in opening a button plate, look no further, some of the ones mentioned in this article will help you with the opening.

In this case, you should know that it is almost certain that the sheet will be irretrievably unusable, therefore must be replaced by a new one.

The key is in the central button of the plate. Seek to extract it with the help of the pliers, twisting and pulling to then penetrate the space that will remain empty with the screwdriver and make movements throughout the interior.

If you notice that the screwdriver twists and turns without sense, and nothing happens, it is because it is very large and prevents it from reaching the end. Find one that is thinner and fits the system perfectly.

What has to happen is that, with at least a couple of turns, the door can open. Before you hear the characteristic clicks of an opening.

The TRUTH about HOW TO OPEN a LOCK with a NUT wrench!

The TRUTH about HOW TO OPEN a LOCK with a NUT wrench!

Leave a Reply

Your email address will not be published.