> How to open a door that is locked from the inside

How to open a door that is locked from the inside

It is no secret to anyone that to open a door that is locked from the inside, we just have to place the key in the keyhole, turn and voila! Door open because with that the insurance is deactivated. But the problem starts when we have a bad day and we forget or misplace the key, so in that case what do we do? How to open a door that is locked from the inside?

Quiet! That, although we cannot solve your bad day, we can alleviate a part of it, so we will help you open the closed door with a few tricks that we will show you in this article.

padlock open with the key on

Look for the tools you have at your fingertips

To get started, try locating some paper clips, screwdriver, hammer, hair clip, or a hex wrench, also known as an Allen key. Any of these elements can help you open your door. But beware, the effectiveness of the tool you choose will depend on the type of lock. You may like to compare with the following link item to see how the open a door with a lock from the inside.

For example, the hex key is ideal for opening doors with knob or handle locks with an eye hole. Instead, the flathead screwdriver, depending on the size, may work on finer slotted knob locks. While the clips open slightly more complex locks.

Now, once you locate the required elements, read and apply the following tips:

hanging from a branch a pendant with a key

Use the Clips

For this first technique, you will use a pair of clips to remove the latch from the door. This technique is generally used as one of the first solutions to face this type of incident. The clips are transformed in a certain way to be manipulated, just as one would do with picks.

  • You must take one of the clips and give it an L shape, this clip will serve as a lever to press when you need it.
  • You will stretch the other clip until it is completely unrolled and, at one of its ends, you will make a small curve.
  • Once you have your tools ready, proceed to insert the clip that you gave it an L shape into the lock slot, take it to the lowest part of the lock.
  • From the moment you introduce it, you must apply pressure until the end of the process (continuous and gentle pressure).
  • Now, you must insert the next clip straight (the bent tip is the one that should go in and be up) to the bottom of the lock.

Since you have your two tools inside the lock, he begins to maneuver with them.

  • Make movements up and down with the clip that contains the hook at the tip, the one at the top, so that you touch the pins and you can release the lock. This procedure should be done with each of the pins until they are aligned.

So you should go moving the clip from the outside to the inside, giving light blows upwards.

  • When the pins are aligned, it makes a sound that indicates that you can insert the hook further and continue the movement upwards.
  • Then, you should take the lever (the L-shaped clip), push it gently and turn it, just as if you were opening it with the key. If all latches are unlocked, the door will open. If not, you must make sure which one is still stuck to lift it by applying the process again.

Hair clips

This technique is quite similar to the previous one, except that the materials to be used will be two hairpins.

In the same way, you must transform them to be able to apply the process. Open one of the forks to the point that you can give it an L shape, and stretch the other one and at one end, lift it a little until it forms a small curve. When you’ve done all of this, move on to the part of the procedure to release the safety pistons, as detailed in the clip technique.

If you cannot unlock the pins, you should always start the process again with great patience, you must be calm to guarantee your precision in both techniques.

Allen wrench

As we already mentioned, Allen keys may not work for various lock tipis, but it does work for knob locks.

For example, if your lock is a single knob with a push-button latch, you can insert the longer end of an Allen key with the dimensions of the key’s insertion hole.

You put it in until the end and give a light blow to remove the safety from the bottom. On the other hand, if it is a rotary knob safety, you must insert the Allen key, push it slightly and turn it in the open direction, while turning the knob.

Bumping key

Bumping keys are a kind of universal key, since they fit into any lock, precisely because of their design, and are sold in locksmiths for the exclusive use of locksmiths; as they are not easily accessible to everyone, we suggest you create your own bumping key.

  • You must take a key that goes into the lock, file its teeth down until they are aligned and in a lower position than they normally are.
  • Locate a hammer or some hard material (a stone will do).
  • When inserting the key, you should hit it hard and firmly with the hammer or the found material. The single hit will lift the safety pins on the lock, then you can turn the key and open the door.

This technique is a quiet way of unlocking the door without leaving a trace of force on the lock cylinders or pins. It is for this reason that it has become the ideal tool for criminals, since with a key they can open several locks. So we recommend that you be careful while opening your door with this technique. Don’t let them see what you do.

In addition, the fact that these keys can be manufactured at home does not mean that we encourage you to misuse it, remember that we seek to help you in the home incidents that may occur.

How to open a locked door – Fix faulty stuck lock – Handyman HACK

How to open a locked door – Fix faulty stuck lock – Handyman HACK

Leave a Reply

Your email address will not be published.