> How to open a Multilock door

How to open a Multilock door

Multilock door designs are usually really beautiful and give homes a unique candor as well as elegance. Therefore, they are the favorites among users seeking to increase security and change the look of your home. But they can be a real problem when, for some reason, we forget the key or the lock fails.

If that’s the case for you, and you have to open the door that, for some reason, got locked or you just don’t have the key, don’t worry! Because in this article we will teach you how to open a multilock door for you to solve with your own hands.

Investigate the details of your Multilock door

Before undertaking any work to open a multilock door, it is necessary to detail the characteristics of the door in order to identify its strengths and weaknesses. That is, look for the opportunities it offers you to be able to be forced and the places that make it strong so that you do not embark on an impossible.

So you will see that you solve, in less than you think, the difficult situation. Although you should know that everything takes time and difficulty, but the important thing is to try and not give up on the first failure, remember that you are not a professional locksmith.

Techniques for opening multilock doors

To use the lock pick technique you should know that you can use them in case you do not have the keys in hand. In addition, this technique is one of the most appropriate at this time.

Its easy adaptation makes it quite a technique popular with locksmiths and amateur users. For some cases, people usually have the original lock pick tools, if you don’t have them you can ask among your acquaintances and try your luck.

But do not complicate yourself, you can also do them yourself by simply locating household or office objects, such as hair clips, clips, pens, wire or a fine screwdriver.

To work with the lock pick technique you will need the aforementioned tool and a wrench that applies tension. We will show you how to make them with any of the household materials.

If you go for clips, for example, first you have to stretch it very well until it is a straight line. You will need two. One, you will bend it at one end, pointing it in a straight direction, or easier, as if it were an L. That will be the tension key.

For the pick, you will also bend one end, curving it into the shape of a clothespin, hook, or letter c.

This part is so that you can hold the tool and allow you to have a penetration limit. Keep in mind not to take up a lot of space when folding.

Let’s start working, insert the tension key first, along the entire center line of the lock. Do it from the bottom up, so that you recognize the internal system. Once you are up, leave the tension key there fixed.

Then, embed the pick below the tension key, so that with it you seek to lift the pins that maintain the safety lock. The correct technique to do this is to keep the tool under the pins until you give an upward push and they all lift up.

Leave the pick in that position so that you can resume the tension key that will now take center stage as if it were the key itself. Make opening movements for the door with it. You can try this several times, until you can make a full turn and fully open the door.

Using an X-ray is valid and common because it works so well and is easy. It is known as the lever method, and it is used to open doors that have jams, even in the lock. Even more so if the multilock door is with rotary locks. Anyway, great possibilities.

Although it is necessary to understand that this technique does not work if the door has an old key or if it does not have at least a minimum gap between the door and the frame.

To begin, slide the X-ray through the slot between the door and the frame, from the top to the top of the lock. Being there, it locates the slip that is installed between these two parts as well. It is a moving piece of metal.

The purpose is to remove it from the strike with a flick and quick up-down and bottom-up movements. To later retain it by creating a barrier with the X-ray, so that it does not re-embed in the frame. Then, turn the handle or lower the hook if it is one of these characteristics.

With the help of your body, push forward. These three steps must be synchronized, do not neglect any and you will be able to open the door very quickly.

Brute force is capable of opening any door, but it will probably also leave it irretrievably damaged. You never know how the type of brute force you use will influence, but it can cause serious material damage.

If it is with an electric saw, for example, it can be severely damaged and aesthetically destroyed. But if the reasons that will lead you to use it justify it, then do it! more if it is an emergency. It will be enough to place the saw in the space closest to the lock and the frame and cut.

Take care to use elements that protect the eyes, hands and mouth of the metal splinters that can jump.

Now, with a drill the task is similar, but it will only affect the lock. You can save the door. Locate a sturdy bit the size of the key entry hole to drill into the inside of the lock mechanism.

Once the drilling is done, put in a slightly larger bit and drill again. That is the one that performs the work for the total destruction and subsequent opening; which must be done by inserting a flat screwdriver through the hole created, turning it in the direction of the key. The dimensions of the screwdriver must match those of the hole.

Mul-T-Lock Classic Euro Profile Cylinder Picked and Gutted

Mul-T-Lock Classic Euro Profile Cylinder Picked and Gutted

Leave a Reply

Your email address will not be published.