> How to open a sliding door lock

How to open a sliding door lock

The internal and external design of the spaces indicates the most suitable door models for each of them. Of course, also the taste and desire of the owners has a lot to do with it.

For example, sliding glass doors are used on balconies and exits to internal and external gardens to enhance the view in these spaces. It is a way of exalting coexistence with nature and relating one area to another. But still, each space has its own security; and this is manifested in the lock that protects each access.

Of course, there is a drawback with this, these doors are exposed to environmental factors and for this reason the locks run the risk of rusting and locking, especially when they are not properly maintained.

However, the daily occupations absorb us and those details escape us so we do not we react until the least happens desired and the door does not open, then how to open a sliding door lock.

Sliding door locks

As we have said before, sliding doors are used in internal spaces, or at least within the same property and rarely have access to the front door. That is why the security level of a sliding door lock is not very high. At least not in conventional models.

Still, when sliding doors lock, due to rust or some other factor, they can be difficult to open. So in these cases we have to resort to concrete actions to open them, actions that depend on the cause of the failure.

Here are some solutions:

Using a knife

Most sliding door locks have a hook as a system to secure the door. We will exploit this vulnerability.

  • We will use a knife, which must be rigid and not very large and we will begin by locating this hook or latch.
  • Later we will introduce the knife in the slot that allows us to access the latch, we will place the knife under the hook and applying force we will make an upward movement, looking for the hook to lift and thus release the door.

This method can also be implemented with a screwdriver or some long tool that can be used under the same application to achieve the same end.

Using a hanger

In this case we will only need a clothes hanger, as said in the previous method, most of the locks for sliding doors have a hook to secure the frame or close the door, so we will take advantage of the hanger to remove it.

  • We will need a wire hanger, to which we will tighten the curved part where it is hooked or icing, to use it as a hook.
  • Now we locate the position of the latch or hook, and introduce the hook of the hanger to pull the latch, using enough force to achieve it. If in the first attempts we have not succeeded, we can tighten or close the hook provided by the hanger.

If the material with which the hanger is made is not very resistant and bends when applying force and trying to pull the latch, we can replace it with a more resistant wire, making a hook similar to the one provided by the hanger and applying the same procedure.

Removing the screws

Some sliding door locks have visible screws which are responsible for fitting their parts or for fitting the lock into the door. This is an aspect of the lock that we can take advantage of.

  • We obtain a screwdriver according to the characteristics of the screw or screws that we must loosen.
  • To begin, we will locate the position of all the screws that we must remove, and then begin to remove them one by one, regardless of the order they have, the important thing is to remove them all.

There are locks that have screws on the edges and there are other types of locks that have a screw in the center of the handle to unlock it.

Once we have all the screws out, what we must do is study the interior system of the lock. Using the screwdriver or a long tool we can move the interior system and deactivate it, or we can unadjust the lock to remove the latch or hook that keeps the door closed.

Using a drill

There are some sliding door locks that have a key system. So if this is your case and you are in an emergency and the fundamental thing is to access the interior regardless of whether you have to damage the lock, then we can use a drill.

It is essential that you bear in mind that after this procedure you must change it if you need to maintain the security of the premises.

Apart from a drill, we will need a drill; This should not be very fine, but at the same time a very thick bit is not necessary.

  • We need to drill the center of the keyhole. For this reason, the bit we choose must also be made of a resistant material. In addition, we will need a flat-head screwdriver or a similar tool.
  • We place the bit in the drill and with great caution we will drill exactly in the center of the keyhole.
  • If we feel that the bit is stuck, we must remove it and reinsert it, as it could break.
  • We will drill as deep as possible or up to the length provided by the bit.

In some fragile locks, the lock cylinder may break and come out easily. In the event that it is not Thus, we will implement the flat-tipped screwdriver, and we will insert it through the hole that we have drilled and we will try to unlock the internal system so that it allows us to open the door.


Before trying any method that damages our door, we can look for an alternative way to enter the interior of the area we want to access.

If the objective is to access the interior regardless of the cost, because we are facing an emergency, we tell you that some sliding doors are made of glass so we can break it with a blunt object. Or, at best, call a locksmith.

how to open sliding glass door

how to open sliding glass door

Leave a Reply

Your email address will not be published.