> How to open a stuck door

How to open a stuck door

We are going to tell you a story, it is not from fairy tales and if you have been through something similar, you will surely say that it is a horror story. But suppose you are the protagonist:

You are at home doing your common activities on a weekend, opening and closing doors as you normally do. Children playing in a room, doing childish things, but suddenly you only hear screams of despair from the room; one of them he got locked in the bathroom.

You run to their aid, you verify that the door does not have a past lock and is still closed, you quickly identify that the door is stuck. So what about the little one, how do you get it out? It is probably at that point that you ask yourself something that we all need to know:how to open a stuck door?

But don’t worry, the answers are in the next few lines… keep reading!

Using the Lever method

For example, a stuck door may be due to a stuck or faulty lock. Perhaps the problem is a slip gap; This is the metal part that comes out of the lock and enters the strike, keeping the door closed.

When the door is jammed due to the lock, you have to use methods that attack it directly, in a good way, of course. To do this, we could use the lever method, which consists of applying a little pressure to the slide to remove it from its closed position and open the door.

To do this, you need an element that we can insert between the lock and the door frame, such as a plastic card, an X-ray, a screwdriver or a butter knife.

The truth is that because it is a situation that involves a stuck door, we recommend using the most resistant material so that you can fight with the latch. If there is a possibility, use the flat screwdriver or in the last case, the plastic card. What should you do?

  • Well, insert the screwdriver right into the slot in the frame and door, above the latch.
  • Place it diagonally and make a small slide with a little speed until you get it hooked with the slip.
  • At that point turn the handle, if the door has it, otherwise insert the key and turn it to the opening side at the same time that you push the latch towards the lock with the screwdriver. Both movements will allow the slip to rearrange itself and open the door.

With this it is clear to us that the problem was the latch or slip that was out of adjustment, so it is necessary to readjust it to prevent it from locking again once the door is closed.

The first thing is to check the metal plate that is attached to the frame with screws, it is likely that it is loose or has moved. If so, use a screwdriver and place it in place, this will allow the latch to make its correct lock-lock transition.

If the plate is properly located, check the movement of the latch. If it is misaligned, you will need to disassemble the lock and adjust the loose mechanism. You should be aware that sometimes the internal mechanism is damaged and that is why the latch locks itself. So you will probably need to put in a new lock.

Remove the hinges

Sometimes the problem has nothing to do with the lock, the doors too present difficulties that make it impossible to function. An unevenness, for example, can lead to them rubbing against the ground or getting stuck. In these cases, it is advisable to remove the door to level them, for this the hinges must be disassembled.

The hinges are made up of flat metal sheets, which are joined thanks to a pin or bolt that is housed inside the cylindrical tubes that they contain, thus giving them interlocking and stability.

  • To remove the hinges, we must extract the pin that joins them, for this we must lift the head of said pin, it is the one that can be seen with the naked eye. With the use of a flat screwdriver, we can insert it into the small slot it has and pry it up.
  • When we manage to detach the upper part of the peg, the rest will come out easily, but if not, then hit the bolt by placing the tip of the screwdriver on the bottom side of the head of the peg, hit with a hammer and the piece will finish get out.

The same procedure is repeated for each hinge that contains the door since only by disassembling them all is how you will be able to remove the door.

We must mention that this is only possible if we are located in the area where the hinges are. That is, if we have access to them, if not, we recommend doing the following technique.

Pry the door

Another alternative that we can use to open the door if the problem is not with the lock, is to pry.

For example, if the door is stuck due to humidity problems, it tends to block in specific areas, that is, if it got wet in the lower part then it must be tightened only in that part so that, if we pull it, the upper area must shake. . If that is happening to you, use a kickstand and hook the affected part of the door,

The next thing is to move the door to your location with the kickstand and at the same time pull the handle to fully open.

Of course, if the door opens in the opposite direction, you should not use the kickstand as we previously recommended. You will need to use it by resting the tip on the door frame so that the curvature propels the door with each push. However, this movement can break the frame so it is not highly recommended.

The best thing in that case is to push the door and the ideal is to use a piece of furniture or support one of your feet and push hard. Without kicking because the impact can hurt you.

You can also use your body to generate the push, but use cushions for support.

Key Stuck In Lock – Won’t Come Out ** Solved – Locksmith Parramatta

Key Stuck In Lock – Won’t Come Out ** Solved – Locksmith Parramatta

Leave a Reply

Your email address will not be published.