> How to remove silicone from a lock

How to remove silicone from a lock

Criminals are always in search of new tactics, which allow them to commit their misdeeds. One action that has become common is the use of silicone-based glue to lock the locks of homes, businesses or offices.

This act of vandalism is extremely inconvenient and potentially dangerous; Since a priori, it makes it difficult for us to enter our home or business to carry out the pending tasks of the day. But in addition, it may be the case that the blockade is only a means and a distraction, to perpetrate a kidnapping.

The good news is, removing the glue from the security system can be a simple task; although this will depend on the type of lock or cylinder that we have installed, the silicone used and the length of time that has elapsed since the vandalism occurred.

No one is completely exempt from being a victim of one of these acts, so it is necessary to learn how to prevent and solve one of these uncomfortable situations. In this article we will not only teach you how you can clean your lock, but we will also indicate how to prevent these attacks and some general recommendations. Let’s get to it!

Previous considerations: Silicones

Before communicating how to remove silicone from a lock, you need to understand what they are; Because understanding its composition will help you with the cleaning process.

Silicones are adhesives made up of organic and inorganic elements; its state of hybridity allows it to be highly resistant to extreme temperatures, over time and to stick all kinds of materials with many kilos of pressure or force. Additionally, it gives it qualities such as quick drying or elasticity.

Before removing the silicone from a lock, we need to determine the type of compound used in our cylinder. This task will considerably facilitate the extraction process; because we will know how to attack the adhesive. Among the types of silicone with the greatest presence in the market we have:

  • Thermo fuses; which melt when heat is applied locally.
  • Emulsions; used mostly industrially or to connect pipes or cracks. These are usually the ones used by criminals for their ease of use.

and helping us with the needle and the disposable cloth, we will begin with the process of removing the silicone as indicated in the Step 2.

We will repeat this process of applying solvent, heat and extracting the silicone; until the cleaning process is complete.

Step by step: How to remove silicone from a lock

As we mentioned at the beginning, silicones have a hybrid composition that makes them highly resistant and durable; so to save our lock we will have to act quickly and diligently. To begin with the cleaning process, we will have to have a few materials; these are:


  • Professional solvent.
  • Heat source (heat gun or hair dryer).
  • Needles, picks, Allen keys or similar thin and resistant instruments.
  • Disposable cloth.

STEP 1. Appraisal: To begin the cleaning process, it is essential that we check the condition of the silicone; that is, if it is liquid or has started its drying process.

STEP 2. Liquid: If it is still liquid, we will begin by removing as much adhesive as possible. To do this, we will use the sharp object that we have at our disposal and a disposable cloth. We will start by inserting the needle or pick slowly into the lock, removing as much silicone as possible and cleaning the excess on the cloth. As we go further into the extension of the cylinder, we must be more careful to avoid pushing the silicone up to the pins.

Once we verify that it is impossible for us to continue removing the silicone with the pointed object, we will go to the professional solvent. To do this, we will place its nozzle at the entrance of the keyhole and spray the necessary amount of the product, following the manufacturer’s instructions. In some cases, it is essential that we apply heat to accelerate the action process. We will repeat this process a second or third time if necessary; then we will proceed to complete the cylinder cleaning.

STEP 3. Dry: If after conducting the appraisal, we notice that the silicone has dried and hardened, we will proceed with the dissolution process. To do this, we will apply small amounts of solvent to the lock and apply direct heat, until we notice how the adhesive begins to melt. At this point, and helping us with the needle and the disposable cloth, we will begin with the process of removing the silicone as indicated in the Step 2

We will repeat this process of applying solvent, heat and extracting the silicone; until the cleaning process is complete.

STEP 4. Conclusion: Once we have finished, we will proceed to check the status of the lock. This is possibly the most important point; as it will determine if we can continue to use our cylinder or will have to replace it. Some people wait a reasonable period of time before inserting their keys into the cylinder. This action allows to know the current state of the lock’s security mechanism; that is, if the bolts continue to function properly. This is because, after a while, the temperature of the cylinder will return to its natural state and if a residue of silicone remains, it will dry and harden again; so we will know if the lock can continue to be used or we will definitely have to change the cylinder.

General recommendations

Although we cannot completely avoid being victims of vandalism like this, we can prevent it from being serious enough that we have to go to a professional or end up changing our lock. To do this, we can take simple but highly effective measures, such as:

  • Do periodic maintenance on the locks: This is one of the simplest and cheapest preventive methods. It will be enough for us to keep our locks lubricated with oils or special greases for cylinders. This will not only allow it to work correctly, but if a silicone-based glue intervenes, it will not stick to the walls of the bowler. So we can easily clean.
  • Install shield: If you want to avoid the problem entirely, you can opt for a more secure system; For this we advise you to install a Lynx protector or a magnetic ear plug. In this way, the lock will be hidden from any potential attack. While to enter the enclosure, you will only have to use a special key to mobilize the shield and finally discover the bowler hat.

The maintenance of our locks can keep us safe from the attacks of crime and although we sometimes neglect this work, we must be aware of its great importance. It really doesn’t take long and can save us a lot of headaches, bad times, and money.

On the other hand yeah you determine that you cannot complete the In the job of cleaning the cylinder, it is best to call a locksmith to complete the task. This professional can also tell you if it is possible to recover the bowler hat or if unfortunately, there is nothing that can be done.

Ideally, we are prepared for any possible attack. Consider installing special devices if you live in a high-risk area or if there are waves of vandalism in the area. Ensuring the safety and tranquility of our family may be simpler than we think; Therefore, it is convenient to be aware of the maintenance and the events that occur around us.

How to Remove Silicone Caulk With Tile Solvent : Home Sweet Home Repair

How to Remove Silicone Caulk With Tile Solvent : Home Sweet Home Repair

Leave a Reply

Your email address will not be published.